Mounting Brackets

 

 

 

 

 

Full Length Bracket


Standard bracket included
with each 1680MM vertical
unit. Easily mounts to rack,
cabinet rails or cross braces.
Allows 0º to 180º rotation of
PDU.

 

VCB-1 (Optional)


Vertical Extension Brackets
Extends vertical strip mounting footprint by one foot while increasing mounting point options in this span.

 

XB-7 (Optional)


180MM Extension Brackets
Extends 180MM from rack rail, beyond
most cable management systems. May
be installed in conjunction with other
equipment mounted in the same “U” space.

 

SLB-4 Mini “L” Brackets
(Optional)


100MM “L” shaped brackets are
included with 430MM vertical/horizontal units. Turned into the unit, these brackets are ideal for rack rail mounting. Turned away from the unit, these brackets can extend your mounting options by an additional 200MM.

 

EZB-1 Offset/side Mount
Brackets (Optional)


Provide options such as left or right rack rail mounting and front or rear of rack mounting. May be installed in conjunction with other equipment mounted in the same “U” space.

 

Tooless Mounting Hardware


This handy accessory is now included
with all 1683mm vertical XP and ZP
series PDU’s. These unit chassis now
come with holes spaced at 1556mm
and 1645mm center to center for
you to attach the shoulder washers.
With a simple lift & snap the PDU can
be secured to your rack or cabinet’s
tooless mounting cut-outs.